丁川. 拖拉机驱动轮载荷的轴承测试法[J]. 农业工程学报, 1993, 9(4): 39-43.
    引用本文: 丁川. 拖拉机驱动轮载荷的轴承测试法[J]. 农业工程学报, 1993, 9(4): 39-43.
    Ding Chuan. To Measure Tractor Driving Wheel' s Load at Bearing[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1993, 9(4): 39-43.
    Citation: Ding Chuan. To Measure Tractor Driving Wheel' s Load at Bearing[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1993, 9(4): 39-43.

    拖拉机驱动轮载荷的轴承测试法

    To Measure Tractor Driving Wheel' s Load at Bearing

    • 摘要: 为方便地获取拖拉机驱动轮载荷,在驱动轴轴承上安装了一个新型轴承传感器——曲面环,以测取轴承载荷,该载荷反映了驱动轮载荷。应用这种方法测取了耕地时拖拉机的左右驱动轮垂直载荷时间历程,并得到了载荷的频率特性和载荷与耕作阻力的关系。

       

      Abstract: In order to acquire the tractor driving wheel load easy, a new type of driving axle to measure the bearing's load which is a reflection of the driving wheel' s load. The load time history of plowing tractor' s driving wheel' s was measured using this method. The correlation of the load to tillage resistance and load' s PSD (Power Spectral Density) was obtained.

       

    /

    返回文章
    返回